Struts
This particular type of support is used in various fields as a tension-compression support element when dynamic loads need to be reduced. The ends are designed to be easily welded to collars or metal structures in any position; Ca.STIm. 2000 struts can be used as pipe guides, replacing expensive metal structures. The strut ends consist of spherical bearings that allow the pipe to move freely perpendicular to the axes of the joint pins; the struts can be easily adjusted as turnbuckles.
The extrusion of the hydraulic terminal also allows for the compensation of small differences in the construction of the bulkheads to be supported.
This is one of many construction sites where we have used hydraulic tie rods and struts.
For information about our products
